If current projections hold, Tropical Storm Barry will make landfall somewhere in Southwest Louisiana (even though as of this writing, the storm is still called Potential Cyclone 2). Environmental hazard remediation after tropical weather always involves mold remediation and water damage restoration. Other environmental hazard remediation work often involves asbestos, lead, PCB, and mercury.

Typically, storm coverage emphasizes mold remediation. I get it – mold remediation has been a hot topic for years now, and will continue to be, especially every time we have a tropical storm or hurricane. Everyone involved with environmental hazard remediation and recovery has to consider the other environmental cleanup hazards they could encounter.

Environmental hazard remediation after tropical storms takes time. Response work, particularly environmental cleanup, must balance speediness and caution. 

I know everyone wants to get in and get everything cleaned up and put back together. But sometimes hasty cleanup efforts can make more of a mess if we don’t slow down and assess all the potential environmental hazards in the work area.

My advice may not make much sense, and I know from my own experience that you want to get things fixed and back to normal as soon as possible. Things may feel (or literally are) upside down after tropical storms.

Remember though, your safety is the most important consideration. Whether it’s water in the roadways, downed power lines, unstable structures, or contaminated water, make sure it’s safe to move around before you try to get in and assess the damage and environmental hazards.

And when the storm is over, we often see hot temperatures return. Dehydration, heat exhaustion, and heat stroke are common problems.

Then worry about contents – it’s worth repeating that you can always replace buildings and contents, but not people.

You can replace buildings and contents, but not people.


I won’t get too far into avoiding mold and mold remediation, other than to link to our other blog posts on avoiding mold. The important thing to remember is to determine the cause of the water or moisture problem that caused the mold.

Maybe the tropical storm or hurricane was the only cause of the mold. Or maybe there’s an ongoing moisture problem that existed before the storm. Find the cause, get the building dried out, cleaned up, and keep the mold from coming back.

Environmental hazard remediation is going to bring about a lot of renovation and demolition work that will disturb asbestos and lead. Don’t get so focused on mold that you ignore other hazards.



Remediation and Demolition Work Areas May Contain Asbestos, Lead, PCB, and Mercury


Asbestos and lead are more commonplace than you may think. It’s easy to encounter asbestos and lead when gutting out buildings – walls and floors often contain asbestos and lead.   

And don’t listen to anyone that tells you there’s a date cutoff for use of asbestos or lead.

Many contractors think to check for asbestos and lead before beginning demolition. Others, however, don’t. Contractors may put (or try to anyway) the burden on you or the building owner to notify them of hazardous materials and conditions.

Giving the contractor a comprehensive scope of work is a great idea. While developing the scope takes time, everyone should have a clear understanding of what’s expected from everyone on the project team. And with everything going on, many times emotion clouds people’s recollection of conversations.

Keep in mind the so-called “other” safety hazards. Protect your hands, eyes, head, and even your ears. Slips, trips, and falls remain the number one cause of job site injuries and deaths. Approach all environmental hazard remediation as you would a real project. After all, that’s what it is, even if you’re doing the work yourself.

Also don’t forget to protect yourself against hazards that may be present in the cleaning chemicals you (or your contractors) will use.


It’s worth mentioning one more time that structures and walking surfaces may be unstable or unsafe. If there’s any doubt, don’t go in. Get out at the first sign of trouble.


Avoid Environmental Hazard Abatement Problems On Your Next Project

Email Chris to get the Renovation and Demolition Checklist

Here are some other useful links:

EPA Mold Homepage

LSU Ag Center Mold Control Tips


How are you preparing for Tropical Storm Barry?

Are you ready? Do you have any tips or project stories you’d like to share? Submit a comment below or email me.

Or if you’d like help avoiding environmental hazard remediation problems on your next project, email me.